Comms Cabinet Shutdown and Power-up Sequence

SHUTDOWN

1. TP Link WAP (on top of cabinet) - Press power button on WAP. [UPS: Surge Only)
   
   
2. IP CORTEX - Press power button on box. [UPS: Battery + Surge)
   
   
3. Switch-Layer 3 (HP 2620-24) - Remove plug from UPS [UPS: Surge Only}
   
   
4. Aruba POE-UTS (Instant On 1960) - Remove plug from UPS. [UPS: Battery + Surge]
   
   
5. SonicWall (Box at bottom of cabinet) - Remove plug from UPS. [UPS: Battery + Surge]
   
   
6. Cisco 4321 (BT Leased Line) - Power switch on front of box. [UPS: Battery + Surge]
   
   
7. ADVA (BT Leased Line - Remove both plugs from UPS. [UPS: Battery + Surge]

POWER-UP

1. UPS - Press power button on UPS (and put cable in wall socket if removed).
   
   
2. ADVA (BT Leased Line) - Plug both plugs into UPS. [Both PSU LED's should come on and also possibly the STA LED. The two access+ network LED's will come on when the Cisco box is on. Maybe wait a bit to see fi the STA LED comes on.]
   
   
3. Cisco 4321 (BT Leased Line) - Switch on power switch on front of box. [WAIT: this one takes a while and may affect the LED's on the ADVA box.]
   
   LED's when fully up;
   
     - Console EN:  Solid Green
     - GE 0/0/1 S:  Flashes
     - GE 0/0/1 L:  Solid
   
   (to the right of the fibre optic type cable) EN:  Solid
   (to the right of the fibre optic type cable) S:  Flashes
   
   (I have pictures and video on my phone of the various LED states on relevant boxes.)
   
   
4. SonicWall (Box at bottom of cabinet) - Plug in plug in UPS.
   
   
5. Aruba POE-UTS (Instant On 1960) - Plug in plug in UPS.
   
   
6. Switch-Layer 3 (HP 2620-24) - Plug in plug in UPS.
   
   
7. IP Cortex - Press power button on box.
   
   
8. TP Link WAP (on top of cabinet) - Press power button on WAP.